Northwest heads up racing

You are not logged in. Would you like to login or register?



Sat Jan 26 1:54 pm  #1


Powerglide wanted

Looking for a powerglide... Prefer a cert'd unit, will look at all that's out there.  Don't need a converter..
Thanks for looking--

 

Mon Jan 28 6:11 pm  #2


Re: Powerglide wanted

I have a stock case P/G, with mostly TCI hard parts in it, fully rollerized, has a TSR 1.80 straight cut gear set, TCI gerotor front pump, hardened turbo input shaft, and a TCI cast valve body with a brake. I bought a new JW bellhousing, case and tail housing in 2010, along with a TCI 10 disc steel front drum with the plans of transfering everything from the stock case over but have not done so yet.

If you are interested in any of it or all of it, let me know. I am in Algona, if you want to look at it. The stock case has about 50 runs on it since I installed the 1.80 gear set and gerotor pump, was still working good when I pulled it out.  We can disassemble for inspection if wanted.


Rick Zitterich


Rick Z
 

Mon Jan 28 6:21 pm  #3


Re: Powerglide wanted

I am interested... You put it together yourself? Or did you have it done?  I am looking for a complete deal so I would be interested in all of it.  Is it a turbo spline?  Could you pm me your number and what you want dollar wise for the tranny, and we can go from there.  Thanks for the reply.  Looking for a cert case as I am limited for space, when it comes to a shield..

Last edited by Halfbreed (Mon Jan 28 6:23 pm)

     Thread Starter
 

Mon Jan 28 7:46 pm  #4


Re: Powerglide wanted

I bought it with the stock case originally, ran it one season, then refreshed it and installed the 1.80 gear set, gerotor pump myself, ran it a half season, then parked the car for awhile. I was going to do the swap to the new case and install the 10 disc drive hub, but never got to that point and now have switched directions on my project and don't need the P/G anymore. It does have the turbo spline. I'll PM you my phone number.


Rick Z
 

Tue Jan 29 3:04 am  #5


Re: Powerglide wanted

Thanks Rick.  I will shoot you a call tues after work.

     Thread Starter
 

Board footera

 

Powered by Boardhost. Create a Free Forum